Rivets

Specification:

Rivet Removal Instruction:

Tools you will need :

1.Needle nose pliers
2. Heat gun (optional)
3. Micro fiber Cloth
4. Soap and water solution

Directions:
1. First clean the area around the rivets with the soap and water solution upon which you would like to remove.
2. (If not using a heat gun proceed to step #3) Use a heat gun to slightly heat the plastic rivet so that it is malleable.
3. Use needle nose pliers to grip onto rivet firmly.
4. Firmly pull rivets away from face using a back and forth motion. (Using water and soap solution can lubricate the area and ease the process of removal.)
5. Your rivet is removed and is ready for replacement.

Rivet installation Instruction:

Things you will need :

1.Micro fiber towel
2. Soapy water (lubricant)
3. Small rubber mallet

Directions:
1. Spray soapy water into rivet holes.
2. Place rivet into corresponding hole.
3. Wrap rubber mallet in micro fiber towel or place micro fiber towel on top of rivet.
4. Gently tap rivet into position until base is flush.
5. Repeat.

Warning: Cancer and reproductive Harm-p65warnings.ca.gov